Veriteq vNet PoE logger interface, veriteq power over ethernet

vNet PoE Logger Interface Specifications

Reduce Installation Requirements for Environmental Monitoring Systems

Because both reliable network communications and cost are important, more and more companies are using Power over Ethernet (PoE) devices in their monitoring applications.

Veriteq's vNet PoE network interface provides easy connectivity with data loggers at a lower cost. The snap-in design streamlines logger connectivity into a small footprint and eliminates wires between separate loggers and PoE devices.

The cost of installing an AC power source at each monitored point is completely eliminated; a significant savings.

The vNet PoE integrates the VL and SP recorders without any compromise to accuracy. With the low price of today's network switches that integrate PoE power capability, the decision to use PoE devices is both cost effective and extremely reliable.

PoE Interface Specifications

Feature	vNet PoE Interface (CDL-VNET-P)
Logger Compatibility	v6.00 hardware and higher (Includes Models: VL & SP 2000, 1000, 1016, 1416, 1400,4000)
Ethernet Connectivity	IEEE 802.3af, 10Base-T Connectivity cable Category 5/5e; RJ-45 connector; 1.83m (6 ft.) cable included
Connectivity Cable	Category 5/5e; RJ-45 connector; 1.83m (6 ft.) cable included
LED Indicators	link, activity, power, logger communications
Device Configuration	HTTP Web Interface, PC-based configuration wizard
Addressing	DHCP/RARP, ARP-Ping, Static IP for IP address assignment, NetBIOS name
Firmware	Field upgradable firmware
Power Consumption	625mW typical, 700mW max
Power Supply (Included but not required when using PoE)	North America: 12VDC/0.5 A max out, 120VAC in International: 12VDC/1.66A max out, 100-240VAC in
Power Input (Optional, for use without PoE)	12-30VDC, plugs into vNet jack labeled 12V
Regulatory	FCC Class A, CE EN 55011, Group 1, Class A; EN 61000-4-2 to -6; RoHS; WEEE
Heating Effect on Measurements	Temperature rise from electronics (important only for loggers with internal sensors): less than 0.05°C as seen by the logger sensor.
Environmental Operating	-25 to 70°C (-13 to 158°F), 0 to 90% RH non-condensing and not to exceed a mixing ratio of 38.5g/Kg Storage: -40 to 85°C (-40 to 185°F)
Dimensions/Weight	10.2cm (4.0"); Width: 10.2cm (4.0"); Height: 4.3cm (1.7") Weight: 180g (6.3 oz)

For more information on the vNet PoE or any other Veriteq solutions, please see our contact page or email us.