Precision Thermistor Temperature Probe

EPT-010

The EPT-010 Temperature Probe works with selected Veriteq SP-1000 and VL-1000 Precision Temperature Data Loggers.

The probe plugs into the side connector of the data logger to allow temperature measurements to be made remotely from the data logger itself.

EPT-010 as used with an SP-1000 Temperature Data Logger

	Type of Sensor	Epoxy-encapsulated NTC thermistor encased in a 1-1/2" x 3/16" (38 mm x 5 mm) diameter stainless steel tip
	Cable	Probes are supplied with 10 ft (3m) of two-conductor twisted pair shielded cable with a plug-in connector
	Thermistor Compatibility	100K ohm thermistor temperature sensor is compatible with Betatherm 100K6A1. Contact factory for resistance-temperature curve information
	Data Logger Compatibility	Pluggable probe connector is compatible with the following Temperature data logger models: SP-1000, SP-1000-2X, SP-1000-LT, VL-1000, and VL-1000-LT. The probe is not compatible with the SP-1000-21X
	Calibration	To ensure accuracy, each EPT-010 probe should be calibrated for use with a specific measurement channel on a